Best Stabilizer For Triax: Guide to a Perfect Balance

Introduction

Finding yourself to be having a hard time balancing your bow? Well, you’re not the only one. Compound bows are extremely hard to handle, especially for beginners. Just like a person needs a balancing rod while walking a tightrope, archers need a stabilizer.

Without proper balance not only will you miss your shot, but you might also sprain your wrist. So you have to ensure you choose the right stabilizer for your compound bow.

This begs the important question, how do you choose the best stabilizer for triax bows? Fret not, we got your back.

You’ll see we’ve provided a top 5 list of stabilizers, down below. This was brought to your attention through the scope of our eagle-eyed research team. The team consists of members who share the same passion for archery such as you.

So you know you’ll be getting money’s worth of information from this write-up. Moreover, we’ve provided a buying guide along with the list. This is to hone your knowledge of the basics of archery.

So what are you waiting for, strap in your quiver, and let’s get to it-

Comparison Table

MILAEM’s Carbon Fiber Stabilizer

So how is this relevant? For starters, you get to choose between different stabilizers. If you’re an archer worth his/her salt knows archery is all about the feels. You determine a lot by feeling which weight or length is suitable for you.

So, when it comes to suitability for both beginners and pros alike, the MILAEM is king.

Another testament to the MILAEM’s adaptability is that it works for both compound and recurve bows. So it’s not just applicable for your Triax, but all your bows too.

Let’s not forget about the material of the MILAEM. It’s made of carbon fiber, one of the lightest yet rigid substances that are known to man. This makes the MILAEM perfect for being a stabilizer as it checks all the optimum attributes. 

Pros

• Excellent Stabilization.
• Great Durability.
• Excellent adaptability.
• Optimum Length.
• Good for both beginners and pros.

Cons

• Hard to add weights.

Bee Stinger’s MicroHex Counter-Slide Stabilizer

Moreover, the Counter-Slide has the highest length of the 5 (along with the MILAEM). This means that it provides an optimum level of stability given its weight. This would help you with your form a lot.

Its micro-diameter also helps with the stiffness of the stabilizer. As a general rule of thumb, the thinner the stabilizer, the better the weight offsetting factor.

It also comes with 5, one-ounce weights which can be added for more precision. However, the Counter-Slide is the heaviest on the list. 

This means if you’re a pro with good form then you have to get used to the weight. As a result, it’ll weigh you down a lot. However, if you’re a novice then it would help you with getting in good form. 

Pros

• Excellent Stiffness.
• Excellent durability.
• Decent adaptability. 
• Good for Beginners.

Cons

• Not a right fit for professionals.
• Heaviest on the list. 

Matthew’s Flatline Stabilizer

Well, not always. This is where the Flatline excels at. For further vibration dampening and better stability, the new Flatline Stabilizer incorporates a unique dampening technology.

This is thanks to its new EHS Nano configuration. Moreover, to provide the ultimate stiffness, the EHS Nano comes with a high modulus carbon fiber rod. Also, carefully machined end cap weights. This allows you to manage the amount of extra weight easily.

Lastly, since the Flatline is the shortest, it is the most user-friendly of the bunch. The shorter flatline is extremely good at maneuvering and convenient to use.

Pros

• Excellent damping capability.
• Decent durability.
• Extremely user-friendly.

Cons

• Not that great at stabilizing.
• Length needs getting used to.

AA & E’s Western Hunter Stabilizer

The Western Hunter has the best noise reduction of the bunch. This means that the Western hunter results in the smoothest shots of the bunch. This is due to the dampening effect of the Western Hunter, which eliminates noise.

However, the Western Hunter is a bit biased. It’s only designed for right-handed archers. This means that left-handers can’t use them.

Moreover, it takes a while to get used to the feel of the Western Hunter. This is not for the inexperienced.

Pros

• Excellent Dampening Effect.
• Results in Smoother Shots.
• Excellent Noise Reduction.

Cons

• Designed For Right-Handed People.
• Not that user-friendly.

Bee Stinger’s MicroHex V-bar Stabilizer

For starters, the V-Bar is the best built of the bunch. This is due to the V-Bar being made of stainless steel stud. This means that when it comes to rigidity and optimal construction, the V-bar is not too shabby.

Moreover, the V-Bar’s Countervail technology provides a good dampening effect. It’s also more user-friendly compared to the Western Hunter because of its style.

Pros

• Decent stabilization.
• User-friendly.
• Excellent durability.
• Best Built.

Cons

• Hard to control for beginners.
• Hard to attach.

Things You Need To Consider Before Buying A Stabilizer

Now, stabilizers are an important aspect to consider in archery. This section focuses on the basics of a stabilizer. Not having a good stabilizer means your shot will be off-target, so it’s crucial you know the basics.

But, not all stabilizers are the same. More importantly, people’s preferences in stabilizers may differ. But fret not, we’ll go over the specifics now.

So, let’s get to it already!

Stabilizer Type

The first thing you need to know about is the different types of stabilizers. There are mainly three, poker stabilizers, twin stabilizers, and reverse stabilizers.

Poker stabilizers

These are long, thin stabilizers that go right below your grip and attach to the bow. 

They’re often long enough to self-stabilize, or they feature disc-shaped weights at the end. Since they’re extremely long, a small weight change has a large effect. 

However, the greatest con about having a lengthy stabilizer is that it’s awkward to change the position.

Twin Stabilizers

Next, we have the twin stabilizer system. As the name implies, it consists of two distinct stabilizers. Here, each of these is mounted where the limbs meet the riser. 

As a result, you have one directly above and one directly below your bow hand. These stabilizers are normally shorter than poker stabilizers. Out of the two stabilizers, the top one is significantly shorter than the bottom.

The addition of the two stabilizers adds to the overall stability. Shots might deviate to the right or left due to rotation. Twin stabilizers eliminate that effect by eliminating the rotation altogether. 

Furthermore, twin stabilizers have a significant dampening effect. The vibration from each limb passes straight into each one of the stabilizers. Not only does this reduce noise, but it also makes the shot seem smoother.

Reverse Stabilizers

Lastly, we have the reverse stabilizers. A reverse stabilizer is a tiny stabilizer that points the opposite way as a poker stabilizer does. It essentially compensates for the disadvantages of the long-rod poker stabilizer. 

The poker stabilizer may be difficult to control as it positions your center of gravity too far in front of you. This is what the reverse stabilizer corrects.

Reverse stabilizers are always positioned behind the riser. Archers sometimes change their setup in a variety of ways. 

As your archery abilities grow, you’ll see where you need additional bow stability. This is typically where the bow twists or waves as the arrow gets fired. 

This varies from person to person, so you’ll see one or two side rods attached to archers’ risers at various angles. You’ll even see that they’re attached even horizontally to the long rod.

Stabilizer Length

Stabilizers are available in a range of lengths, ranging from six inches to thirty inches. Archers typically choose stabilizers based on their personal choices. 

Ideally, it’s wise to choose a stabilizer with a longer length and less weight. This is because it takes more torque and energy to move a longer stabilizer. So it would be easier to balance with a lower weight.

To put it another way, a longer stabilizer helps you to acquire greater stability. They do this while carrying less weight.

Longer stabilizers can result in a higher horizontal center of gravity. Because you’re holding your bow vertically, it’s considerably higher than it is wide, it can aid with form and balance.

Of course, things aren’t perfect. Longer stabilizers are significantly more inconvenient and less maneuverable.

Stabilizer Weight

Stabilizers are generally only an ounce or two in weight. But they give a lot of balance and stability.

How much you want to use depends on your own strength. How much stability you require depends on your level of experience.

Fortunately, many stabilizers come with several weights or the option to purchase additional weights and swap them out. By doing this you can slowly and gradually improve your form and accuracy.

You should also examine how much balance you need. In theory, an archer would not require a stabilizer if they had flawless form, so don’t overdo it. You can wind up doing more harm than help if you already have terrific form.

Similarly, if you get a long stabilizer, you will not require as much weight at the end. Higher weights may solve your problem if your bow hops a lot when you fire.

Stabilizer Stiffness
One of the most crucial characteristics to look for in a stabilizer is stiffness. It’s basically how flexible the stabilizer is.

As a general guideline, your stabilizer’s rod should be as rigid, thin, and light as possible. The weights will be more effective as a result of this. So you’ll end up with a more accurate shot.

FAQs

Question: What’s the optimum drawback pull on an Olympic bow?

Answer: Competitors in Olympic archers use recurve bows that draw an average of 48.5 pounds for men and 33 pounds for women. There is a mechanical sight on the bow, but no optical upgrades. It may also have stabilizers on the bow.

Question: What’s the name of the fastest compound bow?

Answer: The Xpedition X Series bows have a speed rating of 350-352 FPS (IBO for the X30) and weigh only 3.6 lbs. This means not only is the Xpedition the fastest bow made, but it’s also the lightest. 

Question: What’s the meaning behind the 5 whistles in archery?

Answer: This is a call for emergency, which means you have to put all your arrows in your quiver and cease fire immediately. After doing so you have to step back in line too. This is normally signaled when there’s an emergency on the range.

Final Words

I guess this is time for us to say goodbye now, we’re at the very end of our post. Well, we hope you found our piece on the best stabilizer for triax to be of interest. One can hope that you’ve found our post to be enlightening.

But as long as you can balance your bow, and we helped you find that balance, we’re happy. That being said, we’re extremely confident in your hawkeyed perception too. We have no doubt you’ll end up choosing the right stabilizer.

But if you’re having a tough time choosing between the five, choose the top pick. After all, it’s the best for a reason.

That’s all from us here! Till then as always, take care and be safe!